- 3.5 Dayton pattern single bit axe with 26″ straight handle
- Hand sharpened, tapered bit for cutting and splitting
- Body coated with red enamel and the cutting edges in clear lacquer to deter rust
- 26″ straight American hickory handle. Eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening
- Axe head is hydraulically seated onto handle and secured with a serrated aluminum wedge
- The serrated shape improves bite and the aluminum choice of material is strong, lightweight and does not change size with moisture content
- The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2″ of the overall length of the handle is removed during assembly
- ANSI Standards call for bit hardness of Rc 45-60, at least 1/2 inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 48-55 and Council Tool’s target 1-1/4 inches from the cutting edge
- Cutting edge is approximately 4.75″ of overall length and the poll is square
- Forged tool steel head. Made in USA
3.5 Dayton pattern single bit axe with 26″ straight handle. Known as a miner’s axe, the short handle is used for close quarters work. Cutting edge is approximately 4.75″ of overall length and the poll is square.
